Boonton 4500B Peak Power Meter Manual do Utilizador descarregar pdf (Página 96)

100

101

Boonton 4500B RF Peak Power Analyzer

Operation

4-24

Table 4-4B. Chan # > Extensions > Define Pulse > Submenu (continued)

Menu Item Function

(Type) Selections (SCPI cmd)

HINT If you want to use 10% and 90% reference levels in measuring risetime, and you want to use the rule of

thumb relationship between risetime and bandwidth, always set Pulse Units to Volts. If you also want to

view a waveform that most closely resembles an oscilloscope display of the same signal, set the display

units to Volts. The display units setting is optional and will not affect the automeasure result.

Start Gate Pulse Sets the beginning of the pulse measurement region as a percentage of

(Numeric) Continuous range: pulse width

0.00 % to 40.00 %

SENSe[1|2|3|4|6|7]:PULSe:STARTGT <0.00 to 40.00> (percent)

End Gate Pulse Sets the end of the pulse measurement region as a percentage of pulse

(Numeric) Continuous range: width

60.00 % to 100.00 %

SENSe[1|2|3|4|6|7]:PULSe:ENDGT <60.00 to 100.00> (percent)

Fig. 4-17b. Markers Indicate Channel 1 power. Fig. 4-17c. Markers Indicate Channel 2 power.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 371 372

Comentários a estes Manuais

Sem comentários

Boonton 4500B Peak Power Meter Manual do Utilizador Página 96

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Boonton 4500B Peak Power Meter