Boonton 4500B Peak Power Meter Manual do Utilizador descarregar pdf (Página 305)

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-105

Table 5-1. SCPI COMMAND SUMMARY (continued)

READ[1|2|3|4|5|6|7]:MARKer:RATio? Return ratio between MK2 and MK1.

READ[1|2|3|4|5|6|7]:MARKer:RDELTa? Return difference between MK1 and MK2.

READ[1|2|3|4|5|6|7]:MARKer:RRATio? Return ratio between MK1 and MK2.

REFLine:ASSIgn Set ref lines 1 & 2 to specified channel. <arg> = OFF, ACTIVE,

CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2

REFLine[1|2]:POSItion:LEVel Set/return horizontal reference line level. <arg> = -99.00 to 99.00

REFLine:POSItion:FORCetomk Set reference line to current marker positions

REFLine:TRACk Set/return reference line tracking. <arg> = OFF, X1X2,

TOPBOT, DISTMESIAL, DISTPROX

SENSe[1|2|3|4]:AVERage Set/return trace averaging count. <arg> = 1 to 16384

SENSe[1|2|3|4]:BANDwidth Set/return sensor video bandwidth. <arg> = LOW, HIGH

SENSe[1|2]:CALTAB:COUNt Set/return number of cal table values to return as data. <arg> = 1

to 16384

SENSe[1|2]:CALTAB:DATA[:NEXT]? Return count values from cal table, starting at index

SENSe[1|2]:CALTAB:INDEX Set/return index of first cal table values to return as data. <arg> =

0 to 16383

SENSe[1|2]:CORRection:CALFactor Set correction factor in dB. <arg> = -3.00 to 3.00

SENSe[1|2]:CORRection:FDOFfset Set/return current frequency dependent offset table. <arg> = OFF,

TBLA, TBLB

SENSe[1|2]:CORRection:FREQuency Set channel frequency. <arg> = 0.001e9 to 40e9

SENSe:CORRection:FRQTRK Set/return frequency tracking. <arg> = ON or OFF

SENSe[1|2]:CORRection:OFFSet Set/return sensor offset value in dB. <arg> = -99.99 to 99.99

SENSe[1|2]:CORRection:TEMPcomp Set/return temperature compensation. <arg> = ON, OFF

SENSe[1|2]:FILTer:STATe Set/return filter state. <arg> = OFF, AUTO, ON

SENSe[1|2]:FILTer:TIMe Set/return filter time. <arg> = 0.002 to 16.00 s in steps of 0.002

SENSe[1|2]:HISTogram:COUNt Set/return number of histogram bins to return as data. <arg> = 1

to 16384

SENSe[1|2]:HISTogram:DATA[:NEXT]? Return count values from signal histogram, starting at index

SENSe[1|2]:HISTogram:INDEX Set/return index of first bin to return as data. <arg> = 0 to 16383

1 2 ... 300 301 302 303 304 305 306 307 308 309 310 ... 371 372

Sem comentários

Boonton 4500B Peak Power Meter Manual do Utilizador Página 305