Boonton 4500B Peak Power Meter Manual do Utilizador descarregar pdf (Página 209)

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-9

*SRE

Description: Set or return the mask value in the Service Request Enable Register. This value is used to enable

particular bits for generating a service request (SRQ) over the GPIB when certain conditions exist

in the Status Byte register. When a mask bit in the SRE Register is set, and the corresponding

STB register bit goes true, an SRQ will be generated. No SRQ can be generated for that condition

if the mask bit is clear. The bits in the Status Byte register are generally summary bits, which are

the logical OR of the enabled bits from other registers. See the *STB command for bit

assignments.

Syntax: *SRE <n>

Argument: <n> = 0 to 255

Valid Modes: Any

*STB?

Description: Return the current value of the Status Byte register. This register has bits assigned to a number of

possible events or conditions of the instrument. The register value may be read using this

command, or may be used to generate a service request (SRQ) over the GPIB when certain

conditions exist. Individual bits may be enabled or disabled for SRQ generation using the SRE

mask (see *SRE command). Note that the bits in the Status Byte register are generally summary

bits, which are the logical OR of the enabled bits from other registers. The following table shows

the bit assignments in the Status Byte register:

Bit Value Definition

0 1 Not used

1 2 Not used

2 4 Error/Event queue status 1 = there is at least one message in the queue.

3 8 QUEStionable Status Summary 1 = an enabled QUEStionable condition is true.

4 16 Message AVailable flag bit 1 = an output message is ready to transmit.

5 32 Event Status Summary 1 = an enabled Event Status condition is true.

6 64 MSS Summary Status 1 = at least one other Status Byte bit is true.

7 128 OPERation Status Summary 1 = an enabled OPERation condition is true.

Syntax: *STB?

Returns: Current Value of Status Byte register (0 to 255)

Valid Modes: Any

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 371 372

Sem comentários

Boonton 4500B Peak Power Meter Manual do Utilizador Página 209