Boonton 4500B Peak Power Meter Manual do Utilizador descarregar pdf (Página 308)

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-108

Table 5-1. SCPI COMMAND SUMMARY (continued)

TRIGger:BTRIGger:MODE Select B trigger mode. <arg> = OFF, TDLY, EDLY

TRIGger:BTRIGger:SLOPe Set the B trigger slope of the pulse signal. <arg> = POS, NEG

TRIGger:BTRIGger:SOURce Select B trigger source channel. <arg> = CH1, TRIG1, CH2, TRIG2

TRIGger:BTRIGger:TDLY Set B trigger Time Delay. <arg> = 0 to 10000e-3 sec

TRIGger:CDF:COUNt Set/return statistical mode terminal count. <arg> = 2 to 4096

TRIGger:CDF:DECImate Set/return perform decimation when terminal count is reached. <arg> =

ON, OFF

TRIGger:CDF:TIMe Set/return statistical mode terminal time. <arg> = 0 to 3600 sec

TRIGger:DELay Set/return trigger delay with respect to the trigger. <arg> = see

Specifications Section 1-6.

TRIGger:FASTtrig Set/return fast trigger. <arg> = ON, OFF

TRIGger:HOLDoff Set/return trigger holdoff time. <arg> = 0 to 1 sec in 10 nsec increments

TRIGger:LEVel Set/return trigger level. <arg> = -39.99 to 20.00 dBm

TRIGger:MODE Set/return trigger mode on display. <arg> = AUTOPKPK, AUTO,

NORMAL, FREERUN

TRIGger:MODUlated:MODE Set/return modulated trigger mode on display.<arg> = FREERUN,

TRIGGERED

TRIGger:POSition Set/return trigger position on display. <arg> = LEFT, MIDDLE,

RIGHT

TRIGger:SLOPe Set/return trigger slope on display. <arg> = POS, NEG

TRIGger:SOURce Select trigger source. <arg> = CH1, CH2, TRIG1, TRIG2

TRIGger:STATistical:GATE[1|2] Set/return marker time relative to the trigger. Enter time in seconds.

(Ex: enter 1ms as 0.001)

TRIGger:STATistical:GATIng Set/return statistical gating to FreeRun (OFF) or Pulse Gated (ON).

<arg> = ON, OFF

1 2 ... 303 304 305 306 307 308 309 310 311 312 313 ... 371 372

Sem comentários

Boonton 4500B Peak Power Meter Manual do Utilizador Página 308