Boonton 4530 Peak Power Meter User Manual Manual do Utilizador descarregar pdf (Página 19)

Boonton Electronics Chapter 1

4530 Series RF Power Meter General Information

1-5

1.4.7 Interface

Video Output: Compressed representation of detected RF envelope of peak channel(s)

envelope for external oscilloscope monitor or external device synchroni-

zation. This output is roughly logarithmic with input power, is not

calibrated, and can not be used for making any measurements.

Recorder Output: Programmable voltage output which may be used for monitoring mea-

surements or status of either channel, or for outputting a fixed,

programmable voltage. When used as a measurement monitor, the out-

put is proportial to displayed signal level with programmable or automatic

scaling.

Output range: 0 to 10V (unipolar), or -10V to +10V (bipolar)

Output resolution: 5.0mV

Output impedance: 9K

Absolute accuracy: ±100mV typical, ±200mV max, uncalibrated

±20mV after user calibration

Linearity: 0.1% typical

GPIB Interface: Complies with IEEE-488.1. Implements AH1, SH1,T6, LE0, SR1, RL1, PP0,

DC1, DT1, C0, and E1.

RS-232 Interface: Accepts GPIB commands (except bus dependent commands). Provides

for user software updates.

Remote Programming: SCPI (1990) compliant and Native Mode commands via GPIB or RS-232

interfaces.

Software Drivers: LABVIEW drivers available.

1.4.8 Environmental Specifications

General: Manufactured to the intent of MIL-T 28800E, Type III, Class 5, Style E

CE Mark: Conforms to EU specifications:

EN 61010-1(90)(+A1/92)(+A2/95)

EN 61010-2-031

EN 61326-1(97)

EN 55022(94)(A2/97)Class B

Display: Graphic type LCD, with LED backlight. Text and trace displays.

Operating Temperature: 0 to 50° C

Ventilation: Fan cooledFan cooled

Operation up to 15,000 feet.

-40 to 75° C

95% ±5% maximum (non-condensing).

Withstands ±20G, 42ms impulse in X, Y,

Conforms to MIL-STD-167-1.

90 to 260 VAC, 47 to 63 Hz, <50 VA

Altitude: Operation up to 15,000 feet.

Storage Temperature: -40 to 75° C

Humidity: 95% ±5% maximum (non-condensing).

Shock: Withstands ±20G, 42ms impulse in X, Y, and Z axes, as per MIL-STD-810.

Vibration: Conforms to MIL-STD-167-1.

Power Requirements: 90 to 260 VAC, 47 to 63 Hz, <50 VA , <30 Watts. No voltage switching

required.

Battery: One Lithium coin cell for maintaining non-volatile memory information.

Not user replaceable. Typical battery life: 10 years.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 169 170

Comentários a estes Manuais

Sem comentários

Boonton 4530 Peak Power Meter User Manual Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Boonton 4530 Peak Power Meter User Manual